Drag-on Floats

•Made of Polyethylene (The same material used in pick-up truck bed liners) They are Rotational Molded, so they don't neck down in the corners.

•They are air filled and always light to handle and very buoyant.

•Because they line up flush with the framing, they can be lagged to the 2x6 frame and are far more buoyant and stable than a round drum held on with bungee chords and eye bolts.

•They are designed to be dragged by the addition of a skid board. This protects the plastic and extends the life of your dock.

•Drag-On Floats have been known to survive hurricanes that tore other floats apart.

2301

This bottom photo is a cut out model for viewing the inside of the float to show where skid bolts fasten through the center of the floats.

Drag-On Floats fit 2x6 frame 24" on center.

Drag-on Float 10" x 24" x 36" 2301 Wt. = 21#

Bouyancy 300 lbs / Bouyancy Fresh Water 290lbs

Drag-on Float 10" x 24" x 48" 2302 Wt. = 24#

Bouyancy Salt Water 400 lbs / Bouyancy Fresh Water 390lbs