 |
4' x 10' Dock Section with ThruFlow decking: Light weight and breaks down to ship on a 4'x5' pallet. Assembly instructions included. Frame weight is 65 lbs. Each 4'x10' section comes with two pipe feet, two connecting J-Brackets, and two pipe safety caps. J-Brackets snap on for connecting sections end to end, side to side or end to side. Schedule 40, 1 1/2" I.D. galvanized pipe used for dock pipe legs. Pipe legs are sold separately or can be purchased at a local hardware or plumbing supply store.
$915.00 |
 |
4' x 5' ramp with ThruFlow decking: Transition from shore to your first section. This ramp is connected with pins and snap on brackets that allow it to pivot up and down.
$405.00 |
 |
4' x 10' Dock Section with removable Cedar decking: Light weight and breaks down to ship on a 4'x5' pallet. Assembly instructions included. Frame weight is 65 lbs. Each 4'x10' section comes with two pipe feet, two connecting J-Brackets, and two pipe safety caps. J-Brackets snap on for connecting sections end to end, side to side or end to side. Schedule 40, 1 1/2" I.D. galvanized pipe used for dock pipe legs. Pipe legs are sold separately or can be purchased at a local hardware or plumbing supply store.
$725.00 |
 |
4' x 5' ramp with cedar decking: Transition from shore to your first section. This ramp is connected with pins and snap on brackets that allow it to pivot up and down.
The decking on this piece is screwed down.
$405.00 |
 |
Dock Bench Aluminum With Cedar: Includes two square to round sockets and pipe bracket for attaching one pipe to the side of the dock.
$269.00 |
 |
Dock Bench Aluminum with PVC: Includes two square to round sockets and pipe bracket for attaching one pipe to the side of the dock.
$399.00 |
 |
Canoe or Kayak Arm: The end of a canoe or kayak tapers so the 29" of flat area on the arm is plenty of space to support a canoe or kayak upside down. A stainless steel eyebolt on the outer end and a welded in loop on the socket end allows you to secure a strap over the boat. Mounts on 1.5" schedule 40 pipe leg. 50 lb capacity per arm.
$59.95 each |
 |
35º Stairs: 7" Rise, Run 10" ThruFlow Decking on Aluminum Frame. These bolt to the track on the underside of the FeatherLITE Dock Frames.
2 step $301.00
3 step $398.00
4 step $494.00
5 step $594.00
6 step $678.00
Pipe Legs sold separately
|
 |
20º Swing up Aluminum Ladder: Handles bolt to the dock. The ladder portion swings up, over and lays on the dock. The 20º angle makes this ladder much easier to climb. Stainless mounting bolts for FeatherLITE Aluminum Docks are included.
$225.00 |
 |
Vertical polyethylene bumper: An adjustable aluminum socket with set screws is mounted to the back allowing you to fasten it tightly to the dock leg and make adjustments to the height.
$55.00 |
 |
Rechargeable Solar Lights: These shut off when the sun comes up, torn on at dusk. Lasts 18-20 hours on a full charge. Universal pipe mounting included!
1 pair $49.95 |
 |
The FeatherLITE 4x10 dock sections break down for affordable shipping. |
 |
Pipe Foot: Made adjustable with a hole in the base to allow pipe to pass through. Set screws tightens feet in place on pipe. Two are included with each featherLITE section. Price alone on this part is $23.50 |
 |
Cedar Decking. You can let cedar take on a natural weathered look or you can maintain its bright cedar tone by preserving it with a waterbase stain. Stain with a pigment seems to hold up to the sun's rays better than a clear stain. |
 |
ThruFlow Decking is a mixture of plastic and fiber. This decking is very light weight with not-skid texture,
This decking allows waves to pass through with little force similar to water passing through a screen.
|
 |
FeatherLITE dock sections have built in sockets whit set screws making it easy to adjust the height of your light weight frame.
Each 4'x10' frame is only 65lbs.
|
 |
Our FeatherLITE docks have a track on the bottom that allow you to attach snap on connecting J-Brackets. These tracks also allows3/8" carriage bolts to slide in from the ends or corners for attaching bracing or other accessories. |
 |
Snap-on J brackets for joining our aluminum sections end to end or side to side. Each FeatherLITE section comes with two J-Brackets.
|
 |
The FeatherLITE 4x10 dock sections arrive on a 4'x5' pallet to your door or preferably a commercial location with a loading dock area or fork lift. |
